content loaded
RECTORSEAL 66442 Image 1

RECTORSEAL 66442 2INX18FT METACAULK WRAP STRIP

MFR Part #: 66442
SKU #: 1303402
Brand: RectorSeal®
UPC: 21449663588
Metacaulk® 66442 Fire Rated Flexible Intumescent Firestop Wrap Strip, 18 ft L x 2 in W
Limited
For penetrations, plastic and insulated pipe applications

Metacaulk® Firestop Wrap Strip, Fire Rated Flexible Intumescent, 18 ft Length, 2 in Width, ASTM E814/E84/E119/E2174/E2393/G21, CAN/ULC S115, CAS 29 CFR 1910.1200, Clean Air Gold Certified, cULus Listed, FBC Approved, FM Approved, Lubrizol Approved, OSHA Hazard Communication Standard, TSCA Approved, UL 1479/263/723 Specifications Met, Black

Metacaulk® Wrap Strip is a highly intumescent firestop material strip mainly for plastic and insulated pipe applications. When exposed to fire, it expands and forms a very hard char to seal the penetration stopping the passage of flames and hot gases.

Product Details

Metacaulk® Firestop Wrap Strip, Fire Rated Flexible Intumescent, 18 ft Length, 2 in Width, ASTM E814/E84/E119/E2174/E2393/G21, CAN/ULC S115, CAS 29 CFR 1910.1200, Clean Air Gold Certified, cULus Listed, FBC Approved, FM Approved, Lubrizol Approved, OSHA Hazard Communication Standard, TSCA Approved, UL 1479/263/723 Specifications Met, Black

Metacaulk® Wrap Strip is a highly intumescent firestop material strip mainly for plastic and insulated pipe applications. When exposed to fire, it expands and forms a very hard char to seal the penetration stopping the passage of flames and hot gases.

Attributes

Color: Black
Length: 18 ft
Specifications Met: ASTM E814/E84/E119/E2174/E2393/G21, CAN/ULC S115, CAS 29 CFR 1910.1200, Clean Air Gold Certified, cULus Listed, FBC Approved, FM Approved, Lubrizol Approved, OSHA Hazard Communication Standard, TSCA Approved, UL 1479/263/723
Type: Fire Rated Flexible Intumescent
Width: 2 in

Features

  • Easy-to-install
  • Cost effective
  • Versatile, flexible
  • Excellent freeze-thaw characteristics and no cure time
  • Long length means less waste
  • Systems up to 14 in PVC
  • Wrap required number of strips continuously around penetrant to fill annular space or as system design requires
  • Push strips into opening to required depth
  • If cold smoke seal is needed, apply recommended sealant in opening over the strips
  • Difficult penetrations such as plastic and insulated pipe
  • Use only in tested configurations or as recommended by RectorSeal®

Resources

Catalog
SDS
Specification Sheet